The Safecure® range of curing compounds have been specially developed for harsh Australian conditions, designed to retain moisture in concrete for specified periods of time after pouring to ensure good concrete strength and resist shrinkage cracking.

Safecure® 1000 is a premium poly-vinyl emulsion used as a curing membrane on freshly-poured concrete. It is environment-friendly and contains no solvents.

SafeCure 1000 is suitable for curing all freshly-laid concrete either smooth or textured, indoors or outdoors. It will not yellow in sunlight.

It is applied to the concrete as soon as bleed water has gone and concrete has hardened sufficiently so as not to be marked by the application process. Safecure 1000 is applied undiluted at a rate of 1L/5m², so a 20L drum will cover approximately 100m2 of concrete. This product is best applied by spraying, but may also be applied by brush, roller or broom.

• Poly-vinyl emulsion

• Used as a curing membrane on freshly-poured concrete

• Water-based

• Environment-friendly

• Contains no solvents

• Easy to use

• Seals the surface of concrete with a clear, colourless membrane to retain curing moisture

• Leaves the surface ready for subsequent cementitious toppings or render

• Safecure 1000 does not meet AS3799 standards

• Available in 20L or 200L drums.

Alternative product - Click here to check out our hessian curing blanket!

Why should I cure my concrete?

• Curing retains moisture in the slab, allowing your concrete to gain strength as it dries

• Curing delays drying shrinkage until the concrete is strong enough to resist shrinkage cracking

• Proper curing promotes long-term strength, durability, water tightness and wear resistance